Post Aust Wide

Screen Door Lock - Whitco Tasman MK2 - Black


Screen Door Lock, Whitco Tasman MK2 (Black)

This lock is a common lock that is fitted to screen doors or security doors. You can identify this lock from the shape of the latch. The lock handles does come in different colours and also in different models. This lock shown is the most common. If you would like to know if you have a MK2 or MK3 you can look on the edge of the lock for a small circle that will have it printed on the lock body. The lock is easy to install and has full instructions included.

Features and Functions:

  • ?          Key lockable ? deadlock
  • ?          Inside switch for quick lock
  • ?          Key overrides quick lock function
  • ?          Slam shut
  • ?          3 point locking compatible
  • ?          Reversible
  • ?          Supplied in box
  • ?          Lock body is black colour standard
  • ?          Instructions included
  • ?          Screws and striker plate included
  • ?          Cylinder not included - Select Add cylinder if you want it
  • ?          3 Point locking part not included

To install this lock you simply need to place the lock body in cut out in the door. There are 2 screws for the lock body. Put the lock in the locked position. The latch will pop out all the way. Insert the lock cylinder, and test. There is one screw for the lock cylinder. Now assemble the handles so that they operate with a downwards motion and install the turn snip, simply put it in the hole and turn a quarter of a turn. Place the spindle ?the gray bit? through the lock for the handles to operate with and put the handles together and screw from both sides. Test the lock 3 times before locking into the frame, using you finger to depress the small top latch to simulate being locked into the frame. Note** only the big latch will go into the hole on the frame. The little one just get pushed in when locked. Note** make sure the big latch is going all the way into the frame, if not the lock will not operate properly. Note** If the cylinder does not turn, remove it and use a screw driver to move the part inside the lock body up. This will allow the cylinder to line up with the lock internally. Should you need this lock installed, our locksmiths are available for the local Sydney area. Service call and labour fees apply. 

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products

Tags: austral, batman, fly screen lock, mk2 lock, screen door lock, security lock, security screen, whitch tasman

Contact Us

Copyright © 2018 Dr Lock | All Rights Reserved