Lockwood 3582 Mortice Lock - Synergy  - Out of stock

This lock is commonly used on aluminum doors and places that have a limited space to install a mortise lock. This is the lock only, you will need to add handles and lock cylinders. See related tab for more parts for this lock. When this lock is fitted with a lever, the lock then complies with building regulations and some fire regulations. This lock can be configured to be lock on both sides and just one. You can install a lock cylinder on both sides and just one. Different handles are available.

• Commercial grade lock
• Suit aluminum doors 
• Lock backset 23mm
• For hinged doors
• 15mm reversible latch bolt 
• Suit door thickness 32 - 50mm
• Different handles available
• You can change lock function by using the correct lock cylinder?Select, which side is locking and which is free
• Can be selected to unlock handles or pull back latch - using current cylinder for the function
• Can be set to free on the inside at all times - adjustable on the lock
• Cylinder is not included

More info can be found on Lockwood website

Lockwood Synergy Mortice Locks Catalogue.pdf (.pdf, 5.5 MB)

3580 Series Metal Door Installation Instructions.pdf (.pdf, 1.7 MB)

3580 Series Rebate Kit Instructions.pdf (.pdf, 5.1 MB)

3590 Series Timber Door Installation Instructions.pdf (.pdf, 2.3 MB)

Synergy 3580 Series DXF Drawing.zip (.zip, 61 kB)

Synergy Series Mortice Locks Service Manual.pdf (.pdf, 17.6 MB)