Namco & Elite Filing Cabinet Keys Made From Code 3 Dig - Dr Lock Shop

Namco & Elite Filing Cabinet Keys Made From Code 3 Dig

If you have a Namco filing cabinet or stationary cabinet that needs keys, we can make them from the 3-digit number on the front of the lock. The standard lock normally has 3 small digits on the lock. From the numbers, we can enter them into the computer and produce a key to work the lock. The keys have a high success rate if all the steps are followed.

Steps

1. If your lock has been recoded/changed, the key will not work
2. You will need to read the number, be careful not to read it upside down or back to front, 019 can be 610 if it's upside down, See the photos to see which way is up.
3. If your 3-digit code does not fit in the selection option, please email us to see if we can cut from the number

•  2 keys cut
• Works 90% of the time
• All cut keys are non-refundable
• Cut using a computer key-cutting machine
• Filing cabinet -Stationary cabinet - office storage 
• Save time and money

Note. All keys cut to code are non-refundable and non-returnable. If you read the code wrong, select the wrong lock, or your lock is not set to the number printed on the front of the lock or if your lock is faulty, we can not refund the keys. Our keys to code are cheaper than a locksmith visit and having a locksmith come to you and Same a key on-site, so keep this in mind it is worth trying the cheap way first, but you have the risk they may not work off the reasons listed above