Notice Board Keys Made From Code 3 Dig - Dr Lock Shop

Notice Board Keys Made From Code 3 Dig

If you have a notice board that needs keys, we can make them from the 3-digit number on the front of the lock. The lock has to look the same as the one in the photo,

The keys have a high success rate if all the steps are followed.

Your code must be from 001 to 400 only

Steps

1. If your lock has been recoded/changed, the key will not work
2. You will need to read the number; be careful not to read it upside down or back to front. 019 can be 610 if it's upside down, See the photos to see which way is up.
3. Do not post the keys to the locked mailbox you need the keys for, you will still be locked out of the mailbox, even if the keys are inside
4. If your 3-digit code does not fit in the selection option, please email us to see if we can cut from the number
5. If you order more than one code, use a comma when entering in your codes: R011, R332, R065, ETC.. 

•  2 keys cut
• Works 90% of the time
• All cut keys are non-refundable
• Cut using a computer key-cutting machine
• Suit mailbox - Filing cabinet -Notice boards -Lockers -Desks - and more
• Same time and money

Note. All keys cut to code are non-refundable and non-returnable. If you read the code wrong, select the wrong lock, or your lock is not set to the number printed on the front of the lock or if your lock is faulty, we can not refund the keys. Our keys to code are cheaper than a locksmith visit and having a locksmith come to you and make a key on-site, so keeping this in mind it is worth trying the cheap way first, but you have the risk they may not work off the reasons listed above

90% success rate