RST BLANK CABINET 73X8G - Dr Lock Shop
- Brand: RST
- Product Code: R73X8
-
Local StockIn Stock (2)1–3 daysNational StockIn Stock (65)1 week
-
$18.87
- Ex Tax: $17.15
RST BLANK CABINET 73X8G
Product Overview
The RST BLANK CABINET 73X8G is a high-quality pipe cabinet blank designed for precision and reliability. It features a stem length of 47 mm, a flag measuring 14 mm wide by 11 mm high, and an 8G gauge. RST stem lengths are measured from the bottom of the key head to the very end of the stem, ensuring accurate sizing for your locksmith needs.
Key Features
- Stem length: 47 mm
- Flag dimensions: 14 mm (W) x 11 mm (H)
- Gauge: 8G
- Single bitted pipe key
- No collar
- Hole diameter: 4.06 mm
Technical Specifications
| Brand | Rst |
| Bit Length in mm (Along The Stem) | 14 |
| Bit Width in mm (Away From The Stem) | 11 |
| Has a Collar | No |
| Hole Diameter in mm | 4.06 |
| Pin or Pipe | Pipe |
| Pre-cut Key | No |
| Single or Double Bitted | Single Bitted |
| Stem Length in mm | 47 |
Key Gauge to Imperial / Metric Conversion
Use this key gauge conversion table from Dr Lock Shop to identify the correct gauge for old pin keys, pipe keys, safe keys, and other traditional keys. Measure the diameter of the key shaft and compare it with the imperial or metric measurements below.
| Key Gauge | Inches (Decimal) | Millimetres (mm) |
| 1 | 0.300" | 7.60 mm |
| 2 | 0.276" | 7.01 mm |
| 2½ | 0.264" | 6.71 mm |
| 3 | 0.252" | 6.40 mm |
| 3½ | 0.242" | 6.15 mm |
| 4 | 0.232" | 5.89 mm |
| 4½ | 0.222" | 5.64 mm |
| 5 | 0.212" | 5.38 mm |
| 5½ | 0.202" | 5.13 mm |
| 6 | 0.192" | 4.88 mm |
| 6½ | 0.184" | 4.67 mm |
| 7 | 0.176" | 4.47 mm |
| 7½ | 0.168" | 4.27 mm |
| 8 | 0.160" | 4.06 mm |
| 9 | 0.144" | 3.66 mm |
| 10 | 0.128" | 3.25 mm |
| 11 | 0.116" | 2.95 mm |
| 12 | 0.102" | 2.62 mm |
Choosing the correct key gauge: Measure across the outside diameter of the round shaft. Match your measurement as closely as possible with the table above before ordering your replacement key from Dr Lock Shop.


