RST BLANK CHUBB L.SAFE 425X5G
Product Overview
RST BLANK CHUBB L.SAFE 425X5G is a high-quality replacement key blank designed for Chubb lever safes. This blank features a 135 mm stem length and a 20 mm wide by 16 mm high flag, making it suitable for various safe lock applications.
Key Features
- Stem length: 135 mm
- Flag dimensions: 20 mm (W) x 16 mm (H)
- Gauge: 5G
- Single bitted design
- Pin type key (not pipe)
- No collar present
- Not pre-cut
Technical Specifications
| Specification | Value |
| Stem length | 135 mm |
| Flag | 20 mm W x 16 mm H |
| Gauge | 5G |
| Brand | Rst |
| Bit length in mm (along the stem) | 20 |
| Bit width in mm (away from the stem) | 18 |
| Has a collar | No |
| Pin or pipe | Pin |
| Pre-cut key | No |
| Single or double bitted | Single bitted |
| Stem diameter in mm | 5.38 |
| Stem length in mm | 135 |
RST stem lengths are measured from the bottom of the key head to the very end of the stem.
Key Gauge to Imperial / Metric Conversion
Use this key gauge conversion table from Dr Lock Shop to identify the correct gauge for old pin keys, pipe keys, safe keys, and other traditional keys. Measure the diameter of the key shaft and compare it with the imperial or metric measurements below.
Key Gauge |
Inches (Decimal) |
Millimetres (mm) |
1 | 0.300" | 7.60 mm |
2 | 0.276" | 7.01 mm |
2½ | 0.264" | 6.71 mm |
3 | 0.252" | 6.40 mm |
3½ | 0.242" | 6.15 mm |
4 | 0.232" | 5.89 mm |
4½ | 0.222" | 5.64 mm |
5 | 0.212" | 5.38 mm |
5½ | 0.202" | 5.13 mm |
6 | 0.192" | 4.88 mm |
6½ | 0.184" | 4.67 mm |
7 | 0.176" | 4.47 mm |
7½ | 0.168" | 4.27 mm |
8 | 0.160" | 4.06 mm |
9 | 0.144" | 3.66 mm |
10 | 0.128" | 3.25 mm |
11 | 0.116" | 2.95 mm |
12 | 0.102" | 2.62 mm |
Choosing the correct key gauge: Measure across the outside diameter of the round shaft. Match your measurement as closely as possible with the table above before ordering your replacement key from Dr Lock Shop.


